black and white

finished

[d.i.y.] super easy name placements

you’ve hit wedding crunch time and your guest list is finally finalizing. of course, this has to be at the last minute. if you can find a calligrapher at the last minute, that’s great, but you just don’t want to think about it and want to use the ol’ computer and printer for name placements. however, you still want your name placements to look great! here’s a d.i.y. for you!! (if your guest list is mostly finalized and you want to check this off your list earlier on, it doesn’t hurt to make some name placements for the “maybe”‘s and a few blank ones for last minute “i can make it!”‘s.)
結婚式の準備のラストスパート!ゲストリストが確定してやっと始められる準備の一つが席札。印刷会社に頼むのも時間とお金がかかるし、できればご家庭のパソコンとプリンターで済ませたいところ。もちろん、見た目もちゃんとしたいし・・・そこでこのDIYがオススメです!(ゲストリストがある程度確定していれば、お返事をいただいていないゲストの分も多めに作って早めにこの作業を終わらせる手もあります。また、念のため、何も書かれていない席札を多めに作っておくのもオススメです。)

LET’S START! / 始めよう!

the goods

what you need / 材料:
card stock (optional: 2 types for front and back) / 厚紙または画用紙 (オプションとして表と裏で別々の紙を2種類)
printed names / 印刷されたネーム
cutting board / カッティングボード
cutter / カッター
(if available, a paper cutter will speed things up! pre-cut the names and card stock to size before hand (see below steps for sizes. front and back are the same size). / ペーパーカッターがあれば早いです!前もってネームと厚紙を人数分切り出しておくと、なお効率いいです。下記ステップに各サイズを表記しています。厚紙は、表裏共に同じサイズです。)
ruler / 定規
(i used a transparent sewing/patterning ruler (see step 1) to measure and cut simultaneously. / 透明のパターン用定規(ステップ1をご参照ください)を使うと測りながら切ることが出来て、スピードアップ出来ます。)
double stick tape / 両面テープ

cut out  names
1. cut out the names to 8.7cm x 4.7cm/3 1/2in x 1 3/4in (i cut 5mm/1/8in around the rectangle using my patterning ruler). / 印刷されたネームを8.7cm×4.7cmに切る。(透明の定規を使って長方形の周り5mmでカットしました。)

double stick names
2. apply double stick tape to the backs of the names and apply to the center of the front card. / 両面テープをネームの裏に貼り、表になる厚紙の中心に貼る。

cut out card
3. cut out the front card to 10cm x 6cm/4in x 2 3/8in (here i cut 7mm/1/4in around the name paper using the patterning ruler). / 表カードを10cm×6cmに切る。(透明定規を使用してネームの周囲7mmでカットしました。)

cut out backing
4. match the front card to a corner of the back card, and cut to the same size. / 裏紙の角に表カードを合わせ、表カードのサイズに合わせて切る。

score backing
5. with a cutter, lightly score the back card 2cm/3/4in inside one of the longer sides. / カッターを使用して、裏カードを長い辺から2cm内側に軽〜く切り込みを入れる。

close up of score
here’s a close up of the score. / 切り込みのアップ。これくらい軽くでいいのです!

fold score
6. LIGHTLY fold score, with the cut side on the inside. / 優しく折り目を作る。切った面が内側の谷面になります。

double stick backing
7. apply double stick tape to the thinner side of the score, again with the cut side facing down. / 山面になる側の細い部分に両面テープを貼る。

attach backing to card
8. attach the backing to the front card, making sure that the name card is facing right-side up, and aligning the taped end to the top back side of the name card. / 裏カードを表カードと合体する。その際に、表カードのネーム面を手前に向け、裏カードのテープ面が表カードの裏の上端に合わさるように貼ります。

finished
FINISHED! / 出来上がり!

it's flat!
this name card is great because it is easily flattened to lessen the load to take to your wedding reception! / この席札は、平にしやすい上、最低限の場所をとるので披露宴の荷物を詰めやすくします!

[side note / ちなみに]
regarding my printer & paper for d.i.y. wedding paper items
d.i.y.ウェディングペーパーアイテムで使用しているプリンターと紙について

printer & paper
| my printerプリンター |
CANON PIXUS MG7530

an amazing purchase!! it prints both fine or fast, adjusts to many paper types, can print via wifi and from smart phones, and the quality is just great! for weddings, it’s best to print with a “fine printing” setting. it will look absolutely professional! / 重宝しています!ファインとスピーディで印刷設定を変えられ、様々な紙面に印刷できる上、wifiでスマホからも印刷できます。そして、何よりもクオリティが最高です!結婚式のためでしたら、ファイン設定がオススメです。

| aravealアラベール |
MY FAVORITE. i recommend it to all my customers for it’s supple texture and matte look. since i take orders for making name placements, i have my own batch that i order from this online shop and my computer prints perfectly on it. / お客様にいつもオススメしている紙です。表面の凹凸がさりげなく、なめらかでマットに仕上がります。席札のご注文をいただいているので、takeopaperさんから発注して常備しています。自宅のプリンターでも綺麗に印刷されます。

thank you

[d.i.y.] tulle veiled wedding programs

[WEDDING] TULLE WEDDING PROGRAMS
i introduced this “tulle veiled wedding program” on one of my #tbt #fbf posts last month. on this post, i will show you how to make it yourself! i recommend this especially if you’re in your wedding crunch time. to make this program from printing -> cutting the paper and tulle, to tying the ribbon, it took me a total of 30 minutes.
以前に #tbt #fbf の書き込みでこちらの「チュールベールのウェディングプログラム」をご紹介いたしました。今回は、こちらをご自身で作れる d.i.y. をご説明いたします。特にご結婚式の最終段階でお急ぎの場合は特におすすめの d.i.y. です!印刷から紙とチュールの裁断、リボンを結ぶまでかかった時間は30分!

LET’S START! / 始めよう!

what you need / 材料:
any A4 size printing paper / お好みのA4サイズ印刷用紙
card stock (9cm × 22.75cm) / カード紙 (9cm × 22.75cm)
tulle (9cm × 22.75cm) / チュール (9cm × 22.75cm)
scissors / ハサミ
ruler / 定規
hole puncher (i used a 3mm hole, up to 5mm is fine) /
穴あけパンチ (今回は、3mmの穴を使用しましたが、5mmまで可能)
5mm width ribbon (45cm) / 5mm幅リボン (45cm)

[d.i.y.] tulle veiled wedding programs-1
1. create your text on a spreadsheet application using landscape orientation. each individual page should measure 7.5cm × 21cm, which means 3 pages can fit on 1 A4 size page. print.
テキストをスプレッドシートアプリケーションなどを使用して、横向きで作成する。1枚1枚のページサイズが 7.5cm × 21cm になるように、アプリケーション上でA4サイズに3枚のページを横に並べる。印刷する。

[d.i.y.] tulle veiled wedding programs-2
2. card stock should be cut to 9cm × 22.75cm. then, cut A4 size printed text into individual pages measuring to 7.5cm × 21cm.
カード紙は 9cm × 22.75cm にカットし、A4 用紙は 7.5cm × 21cm のページに切り分ける。

[d.i.y.] tulle veiled wedding programs-3
3. cut tulle to the same size as card stock.
チュールはカード紙と同じサイズに合わせて切る。

[d.i.y.] tulle veiled wedding programs-4
4. place tulle and program pages as shown in photo. the top of the pages should be placed 0.6cm away from the edge of the tulle. punch a hole 1cm from the top of the pages and horizontally in the center. if possible, it is more efficient to punch a hole through the pages and tulle all in one go.
プログラムのページとチュールを写真のように重ねる。ページの上端から1cm、横幅の中心位置に穴をあける。可能であれば、チュールと紙をいっぺんに穴あけしますと効率よく、綺麗に仕上がりやすいと思います。

[d.i.y.] tulle veiled wedding programs-5
5. mark and punch two holes in the card stock. 1.7cm away from the top, 3cm apart.
カード紙に穴を2つ開ける。上端から1.7cm、3cm間隔で。

[d.i.y.] tulle veiled wedding programs-6
6. prepare 45cm length ribbon. / 45cmのリボンを用意する。

[d.i.y.] tulle veiled wedding programs-7
7. this is the last step! pull the ribbon evenly through the two holes of the card stock. then pull the ribbon through the single hole of the program pages, then tulle cover.
最後のステップです!カード紙の2つの穴にリボンを通し、続けてページとチュールの1つの穴に通す。

[d.i.y.] tulle veiled wedding programs-8
8. make sure to pull the ribbon all the way through and evenly!
リボンはきつめに引っ張ってカード紙から通したリボンが平行になっていることを確認。

[d.i.y.] tulle veiled wedding programs-9
9. tie the ribbon and voila! / リボンを結んで完成!

FINISHED!

updating business cards

now that i have this website up and running, i wanted to add my homepage address to my business card. yet, all the other information is up to date and i love the look of my business card. so, i decided to make stickers instead.

ホームページを無事立ち上げられたので、次のステップは名刺の更新。でも、今の名刺のデザインを気に入っているし、その他の情報を訂正する必要もない。というところで、今回は「訂正シール」という形でHPアドレスを印刷しました。

updating business cards

my business card is printed on an off-white paper with a lot of blank space. i personally like to keep my things simple and clean, as visual clutter makes my mind clutter. also、as an artist, i feel as though once i start adding this and that, i snowball into a total mess.

私の名刺はオフホワイトの紙に印刷されていて、白紙の部分を多めにしています。ビジュアルがごちゃごちゃしていると頭の中でもごちゃごちゃしてしまうので、自身の作品は、シンプルで洗練されている方が好きなのです。アーティストとしてもあれこれデザインをたしていってしまうと、知らぬ間に台無しにしてしまうような気がします。

updating business cards

if i had printed on off-white stickers, i feel as though my business card would represent a cheapskate. by making them with a black background, it becomes a key design point and brings the eye to the website.
そんな名刺に同じオフホワイトのシールを貼っても後付けに見えてしまうので、あえて黒の背景にしました。これがデザインポイントになるので、HPアドレスも強調されるのです。

updating business cards

a little before and after of my “brand new” business card!
名刺のプチイメチェン ビフォーアフター!

tulle veiled wedding programs

#tbt #fbf past wedding item post time! this week i bring to you, tulle veiled wedding programs. in continuance with the black and white series, this is one of the day-of paper items. one of the easiest to make, but sweetest programs. if you’re doing a d.i.y. wedding, and are in that last minute wedding crunch, i recommend these! i’ll post a d.i.y. of this soon.

#tbt #fbf の過去のウェディングアイテムをご紹介デーです!今週は、チュールベールのウェディングプログラム。この2週間ご紹介してきましたモノクロシリーズの当日のアイテムになります。d.i.y.ウェディングを考えられている方にオススメな簡単だけどスウィートな式次第です。特に、結婚式の準備でラストスパート中に時間が限られているのであれば、是非作ってみてください!近々 d.i.y.版をアップいたします。

[WEDDING] TULLE WEDDING PROGRAMS

a lot of the wedding items i make are printed professionally, which needs to be planned ahead of time. sometimes, if i’m overseas helping with friends’ or family’s weddings, i don’t always have this time or the resources. i used a spreadsheet application to type and print out the text. instead of using a normal computer paper, i used printable japanese washi (traditional japanese paper in which fibers stay in tact and are visible on the surface) paper. as this program is bound by ribbon, any amount of pages can be added.

ほとんどのウェディングでは、印刷会社に印刷を注文することが多いです。その場合には、印刷の納期を考え、事前にテキストやデザインを決めることが必要です。だが、海外で親友や家族のウェディングのお手伝いする場合は、このように時間や発注先がないケースが多いです。このウェディングではスプレッドシート作成アプリケーションを使用し、家庭用プリンターで印刷しました。そして、紙は印刷用の和紙を使用しました。リボン綴じの式次第なので、好きなだけページを増やすことができます!

[WEDDING] TULLE WEDDING PROGRAMS